CCDN-722P/EX-R(PAL) Day & Night Camera

With Mechanical Moving IR Filter IR Filter and RJ45
Well-Noted Features:
1.1/2" SONY Exview CCD

2.Color 480 TV Line/B/W 580 TV lines resolutions
3.RJ45 digital output for remote set-up
4.OSD function for setting camera parameter
5.Easy backfocus adjustment

Fine Brand

Image Area	6.0mm x 3.7mm
Image Sensor	1/2" SONY Exview CCD,752(H) x 582(V)
TV System	2:1 Interlace PAL;V:50Hz, H:15,625KHz
Synchronization	DC power:InternalAC power:Internal/Linelock auto switchable
Linelock V-phase	External VR with 0~300 degree
Video Output	BNC (75 ohm);RJ45 for remote set-up
Lens Mount	CS-mount with easy Backfocus adjustment
Resolution	Horizontal resolution:Color 480TV lines/B/W 580 TV lines
Gamma Correction	0.45 or 1(optional)
AGC	Stand (21dB)/Wide(30dB)
Minimum Illumination	0.08 Lux(F1.4,3200K);50 IRE Night mode 0.0015 Lux(F1.4,3200K);50 IRE Night mode
S/N Ratio	More than 50dB
Shutter Control	Auto & Manual 1/50~1/100,000 sec
Backlight Compensation	Off/BLC1/BLC2/BLC3/BLC4
Iris Control	Video out driver/DC iris driver
Day-night mode Auto/Manual	Color-B/W:(1.5Lux)
Day-night Level	B/W-Color:Low(4.5Lux)/High(7.5Lux)
Day-night IR cut removable	Day Night mode:480/580 TV Lines selectable
Aperture	Low/Middle/High
Serial Interface	RS485
Protocol	Pelco P ,Ernitec
Control Panel	KPT-800,PC Software not Included
White Balance	ATW1:2600� K~6000� K) ATW2:2500� K~9500� K AWC:Push Lock 2500� K~9500� K) Manual:64 steps by push bottom on R-Y,B-Y
Power Source	DC12V/AC24V or AC90~260V
Power Consumption	9W(max.) with AI lens
Ambient Temperature	30~90%RH/-10�C~+50�C
Dimensions	66(W)x55(H)x130(L)
Weights	500g (max)
Accessories	Instruction manual , IRIS 4 pins plug
Emission&Safety&Standard	CE
OSD Menu
D/N Mode	Auto ,Manual
D/N Level	Low,High
D/N FIL	Off,On
Shutter	AUTO,1/50,1/120,1/250,1/500,1/1K,1/2K,1/4K,1/10K,IRIS
GAIN	STD,WIDE
SYNC	INT,LL
GAMMA	0.45,1
BLC	OFF,4Mode
White BAL.	ATW1/ATW2/AWC/MANUAL:R:00~63,B:00~63
Aperture	Low,Mid,High
*Predetmsp	Off,1/50
I.D.PS	Off,Top,Bottom